Saltar al contenido principal
    Guide
    6 minUpdated 2026-11-17 · Reviewed by LT Plastics Engineering

    21 CFR 177.1630 vs 177.1520: Which FDA Rule Covers Your Container?

    PET bottles and HDPE bulk containers fall under different FDA sections. Asking for the wrong one is a common supplier-audit gap.

    Questions? Call +1 (602) 921-6133

    Get the FDA Compliance Checklist + FDA spec sheet and price in 24 h

    Pick your product, leave an email. No calls unless you ask for one.

    1. What do you need?

    Only your email is required · no spam · reply within 24h

    • Authorized Bonar distributor
    • Ships nationwide + Mexico
    • Reply within 24 h

    TL;DR: 21 CFR 177.1630 regulates polyethylene phthalate polymers (PET and related polyesters) for food contact. 21 CFR 177.1520 regulates olefin polymers: polyethylene (including HDPE) and polypropylene. A rotomolded HDPE bulk container falls under 177.1520, not 177.1630. If a supplier sends a 177.1630 letter for an HDPE tote, the document does not match the material. LT Plastics, an authorized Bonar Plastics distributor based in Phoenix, AZ, supplies HDPE bulk containers, IBC totes, hoppers and speed bumps to US plants.

    Quick Facts

    Item21 CFR 177.152021 CFR 177.1630
    Polymer familyOlefin polymers (PE, PP, copolymers)Polyethylene phthalate polymers (PET, polyester)
    Typical containersHDPE totes, bins, tanks, pallets, hoppersBottles, trays, films, clamshells
    Where it sitsPart 177, Subpart B (indirect additives, polymers)Part 177, Subpart B
    Key checksDensity, extractables limits by classExtractables limits by food type and temperature

    What Buyers Often Miss

  1. The rule follows the resin, not the product name. "Food-grade tote" means nothing to an auditor without the resin and its CFR section.
  2. The letter must name the resin grade. A compliance statement should identify the resin supplier and grade and the section it meets.
  3. Colorants and additives count too. Pigments must also be cleared for food contact; ask if the statement covers the finished, colored part.
  4. Conditions of use matter. Both sections tie limits to food type and temperature. Hot fill or fatty foods need explicit confirmation.
  5. What to Ask Your Supplier

  6. Resin type and grade used for the part.
  7. Which CFR section the resin meets (177.1520 for HDPE).
  8. Whether colorants are included in the statement.
  9. Approved food types and maximum use temperature.
  10. Read the full framework in 21 CFR 174-186 explained and does FDA compliant mean food grade?. For containers, see food-grade totes.

    FAQ

    Is HDPE covered by 21 CFR 177.1630?

    No. HDPE is an olefin polymer covered by 21 CFR 177.1520.

    What does 177.1630 cover?

    Polyethylene phthalate polymers such as PET used in bottles, trays and films.

    Does a compliant resin make the container compliant?

    It is the main requirement, but colorants, additives and intended use must also fit the regulation.

    Sources

  11. eCFR, 21 CFR 177.1520 Olefin polymers
  12. eCFR, 21 CFR 177.1630 Polyethylene phthalate polymers
  13. Next step in your decisionBulk Containers for Meat & Poultry Plants: What Sanitation Managers Check Before Buying

    Ready to spec your containers?

    Browse our FDA food grade totes with full dimensions and load ratings, or send your specs and get a spec sheet plus freight quote within 24 hours. Ships nationwide + Mexico.

    Have a similar project? Tell us in 30 seconds

    Get a personalized proposal with pricing, lead time and product recommendations.